Crusher repair and maintenance

1. During the production process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50°C, the machine should be stopped for inspection to find out the cause and eliminate the fault.
2. When the new machine is running, the transmission belt is easy to stretch, so attention should be paid to adjusting the appropriate tightness of the belt to ensure the working life of the belt.
3. Consumable parts should be inspected frequently and replaced in time to ensure production quality and production volume.
4. The blades and bushings should be checked frequently for wear. If they are worn, the productivity decreases, and the particle size becomes coarser, replace them as soon as they are found to be worn.
5. The main engine and graded flow bearings are all lubricated with grease, using No. 2 special grease with a degree of 265-295.
6. The grease-changing period of the bearing is 2000 hours. The filling amount of grease is 1/2 (upper measurement) or 3/4 (lower measurement) of the space in the bearing cavity. Do not fill too much grease, otherwise it will cause the bearing temperature. Too high.
7. The grease change period of the screw feeder is 4000 hours, and ordinary calcium-based grease should be added.
troubleshooting
1. On the output shaft e, that is, the pulley e, avoid slamming it with a heavy hammer to damage the parts.
2. It is strictly prohibited to turn the handwheel handle when the machine is stopped.
3. The lubricating oil used in this speed regulator is N32 alkaline high-zinc high-grade anti-friction hydraulic oil. The reducer uses 401 general lubricating oil and must not be replaced by other engine oils.
4. After 3000 hours of use, the oil should be replaced with new oil, then change the oil for the second time after 500 hours of use, and then change it once every 1000 hours of use.
Auxiliary machine description
The machine device is a high-efficiency cyclone dust collector and barrel dust collector unit. The front and rear stages are combined into one, and can also be used separately according to user needs. This machine is now a series-connected integrated body. The novel dust removal and recovery device has the characteristics of high dust removal efficiency, flexible use, and beautiful appearance. It is widely used in places with high dust concentration and small workplaces. This machine device not only has high efficiency, small resistance, stable and reliable performance, (when the imported dust concentration changes greatly, it will have little impact on the whole system), it has strong adaptability to air leakage, and is suitable for various mining enterprises, dusty gas or recycled materials Use.
When using this machine, it is necessary to ensure that the motor and impeller discharging machine are turned on and the cyclone dust collector is running under normal conditions, and the pipeline must be sealed to avoid affecting the dust removal efficiency. The filter barrel is cleaned automatically. To ensure the working efficiency of the filter barrel, pay attention to the air pressure. pressure.